Clock Timer LED - User's manual.

Print
Details

User's manual for LED clock timer display of Rousis Systems LTD.

The sign is basically operated with the infrared remote control, with a maximum range of 20 meters, with visual contact and focus on the panel.

 

 

User's Menu (F' Menu) - Button [SOURCE]

F1 Select info to display (time-date-temp). * Default: 1
F2 Select Tempo Display Default: 9
b Set LED Brightness 0-16 (0 = use auto adjust with sensor) Default:16
L Sets the brightness level for open-close the out relay (with 2units hysterisys) Default: 16
F5 High resolution temperature  Default: 0
F6 Countdown alarms number (how many) Default: 0
F7  Alarm Lenght (in seconds) Default: 0
F8 Clock dots blinking enable Default: 1
F9 Clock Alarms Enable  

*Select info to display

Code
Clock
 Date Temperature
1
ON
OFF
OFF
2
OFF
ON
OFF
3
ON
ON
OFF
4
OFF
OFF
ON
5
ON
OFF
ON
6
OFF
ON
ON
7
ON
ON
ON

 

Technician's Menu (E' Menu) - Button [FAV]

E0 Clock digits Default: 4
E1 Invert display Default: 0
E2 TLC LED drivers Default: 0
E3 Separate temperature Default: 0
E4 Centimeter of a second Default: 0
E5 External control* Default: 0
E6 GPS Synchronize Enable Default: 0
E7 Buzzer On Default: 1
E8  2 Digits timer modes Default: 0
E9  Time Zone Set Default: 0

*External control code:

  1. Keypad Control Off = 0
  2. Buttons input (Start,Stop, Reset) Up Counter = 1
  3. Buttons input (Start,Stop, Reset) Counter Down 1 = 2
  4. Buttons input (Start,Stop, Reset) Counter Down 2  = 3
  5. Monitor mode (displays only serial data from Pro Timing software)

*  2 Digits timer modes

  1. Normal 2 digits timer with hours-minutes-seconds = 0
  2. 0-59 timer = 1
  3. 0-99 timer = 2
  4. 59-0 timer (Counter down non finish) = 3
  5. 99-0 timer (Counter down non finish) = 4

Set normal Clock  Button - [INFO] 
Change Hours:Minutes:Seconds and press [OK] for save and [left][right] for move cursor.

Set Date  Button - [NET] 
Change Date:Month:Year and press [OK] for save and [left][right] for move cursor.

Set Countdown start times - Button [-/--] 
Use [up][down] for next or previews memory and [left][right] for move cursor.

Start Countdown timer 1 - Button [] 
Use [ok] for start and stop and [exit] for cancel.

Start Countdown timer 2 - Button [] 
Use [ok] for start and stop and [exit] for cancel.

Start Up Counter timer - Button [] 
Use [ok] for start and stop and [exit] for cancel.

Change Live the  timer - Button [Play] 
Use [ok] for start and stop and [exit] for cancel.

Set Alarm Times Button [EPG]
When a number of countdown is enabled from the menu F7 in the User's Menu (F' Menu) from this menu you can set all the alarm times.
Use [up][down] for next or previews memory and [left][right] for move cursor,  [OK] for save or [EXIT] for cancel.

Set Clock Alarms Button [>>]
When "Clock Alarms Enable" is set to '1' from the menu F9 in the User's Menu (F' Menu) from this menu you can set all the alarm times.
Use [up][down] for next or previews memory and [left][right] for move cursor,  [OK] for save or [EXIT] for cancel.

Show Brightness - Button [SHIFT + SOURCE] 
Shows the current brightness for 3 seconds and returns to the main function.

 Clock Timer LED - User's manual remote control

Input instructions cable connection

(For models with input cable for external control of the timer.)

white Reset
Yewllow Stop
Green Start
Brown GND (-)